STIM210代表著全世界性能最佳的硅MEMS陀螺儀模塊，對于一直迫切地想要提供更小巧、優質和便宜的解決方案的系統設計者而言，這是一項重大的突破。STIM210是一款成本和能耗低、重量輕而可靠度高的3軸陀螺儀模塊。
STIM210的重量只有55克，工作溫度范圍內的零偏穩定性為10度/小時，零偏不穩定性為0.5度/小時。系統設計者會毫不猶豫地選擇該產品來替代大且昂貴、脆弱且易磨損的現用光纖陀螺儀(FOG)和機械陀螺儀傳感器。
Sensonor Technologies一直致力于拓展MEMS陀螺儀的范圍并研發一整套全面的高性能慣性傳感器組合，而STIM210正是公司發展過程中的又一個里程碑。
STIM210不受“國際武器販運條例”(ITAR)限制，適用于工業、航空航天和國防市場的平臺導航、導引和穩定應用。
Sensonor Technologies負責銷售和營銷的副總裁Hans Richard Petersen先生表示：“STIM210是我們成功之路上堅實的一步，實現了我們?yōu)槭袌?chǎng)提供更穩定、堅固和經濟的高性能陀螺儀的愿景。MEMS陀螺儀的性能不斷提高。在苛刻的環境中，它有更低的成本、更高的堅固性和可靠度。STIM210讓我們的產品組合可以更好地應對導航和導引領域的更多應用。”
STIM210將于從6月6日開始的一周在德國Sensors and Test和美國傳感器博覽會(Sensors Expo)上推出。
Key features
Miniature package
Excellent performance in vibration and shock
Excellent environmental robustness
1, 2 or 3 axes offered in same package
Electronically calibrated axis alignment
Plug & play high-level RS422 interface
24 bits resolution
Single-crystal silicon technology
Low bias drift
Low noise
Fully configurable:
- 5 different sampling rates available
- 5 different bandwidths available
- LP filter -3dB frequency can be set individually for each axis
- RS422 protocol, bit rate and line termination
- Selectable output unit: angular rate [deg/s] or incremental angle [deg]
Continuous self-diagnostics
Performance
Each axis is factory-calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a "plug & play" high-level RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters.
For more advanced users, STIM210 may be put in Service Mode. In this mode all the configuration parameters can be intermediately or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.
| Parameter |
Min |
Typ |
Max |
Unit |
Comment |
| Range |
|
±400 |
|
°/s |
|
| Output |
|
24 |
|
bit |
RS422 |
| In-run bias instability |
|
0.5 |
|
°/h |
|
| Angular random walk |
|
0.15 |
|
°/√h |
|
| Sampling frequency |
|
|
2000 |
SPS |
Normal value |
|
