| 當前位置：首頁->方案設計 |
|
| MGC3030 3D手勢識別和運動跟蹤解決方案 |
|
|
| 文章來源： 更新時間：2015/1/26 11:20:00 |
在線咨詢： |
| |
Microchip公司的MGC3030 3D手勢識別和運動跟蹤控制器是基于Microchip專利的GestIC®技術,采用電近場傳感技術,包括了開發3D手勢輸入傳感系統所有的塊圖,具有先進的3D信號處理單元,檢測距離 0 到10 cm,接收器靈敏度優于1fF,位置速率200個位置/秒,主要用于音頻產品,筆記本電腦/鍵盤/PC外設,家庭自動化,白色家電,工業開關,醫療產品,游戲控制器和音頻控制.本文介紹了MGC3030主要特性及其功耗特性,外設特性, MGC3030框圖, 控制系統架構圖, 參考電路圖以及Woodstar開發板主要特性和相應應用電路,裝配圖和材料清單.
Microchip’s MGC3X30 are 3D gesture recognition and motion tracking controller chips based on Microchip’s patented GestIC® technology. They enable usercommand input with natural hand and finger movements. Applying the principles of electrical nearfield sensing, the MGC3X30 contain all the building blocks to develop robust 3D gesture input sensing systems. Implemented as a low-power mixed-signal configurable controller, they provide a large set of smart functional features with integrated signal driver,a frequency adaptive input path for automatic noise suppression and a digital signal processing unit. Microchip’s on-chip Colibri Suite obsoletes processing needs at the host, reduces system power consumption resulting in low software development efforts for short time-to-market success. The MGC3XXX family represents a unique solution that provides gesture information of the human hand in real time. Dedicated chip family members add position data, touch or multi touch information to the free space gesture sensing.
The MGC3XXX allow the realization of a new generation of user interfaces across various industry markets.
MGC3030主要特性:
• Recognition of 3D Hand Gestures and x, y, z Positional Data (MGC3130)
• Proximity and Touch Sensing
• Built-in Colibri Gesture Suite (running on chip)
• Advanced 3D Signal Processing Unit
• Detection Range: 0 to 10 cm
• Receiver Sensitivity: <1 fF
• Position Rate: 200 positions/sec
• Spatial Resolution: up to 150 dpi
• Carrier Frequency: 44 kHz to 115 kHz
• Channels Supported:
- Five receive (Rx) channels
- One transmit (Tx) channel
• On-chip Auto Calibration
• Low Noise Radiation due to Low Transmit Voltage and Slew Rate Control
• Noise Susceptibility Reduction:
- On-chip analog filtering
- On-chip digital filtering
- Automatic frequency hopping
• Enables the use of Low-Cost Electrode Material including:
- Printed circuit board
- Conductive paint
- Conductive foil
- Laser Direct Structuring (LDS)
- Touch panel ITO structures
• Field Upgrade Capability
• Operating Voltage: 3.3V (+/-5%) (single supply)
• Temperature Range: -20℃ to +85℃
MGC3030功耗特性:
• Variety of Several Power Operation modes include:
- Processing mode: 20 mA @ 3.3V, typical
- Programmable Self Wake-up: 110 μA @ 3.3V
- Deep Sleep: 9 μA @ 3.3V, typical
MGC3030外設特性:
• 1x I2C™ Interface for Configuration and Sensor output streaming
• Five Gesture Port pins for individual mapping of gesture to EIOs
MGC3030應用:
• Audio Products
• Notebooks/Keyboards/PC Peripherals
• Home Automation
• White Goods
• Switches/Industrial Switches
• Medical Products
• Game Controllers
• Audio Control
圖1. MGC3030框圖
圖2. MGC3030控制系統架構圖
圖3. MGC3030參考電路圖
Woodstar開發板
The Woodstar Development Kit is designed to support an easy integration of Microchip’s MGC3030 3D Gesture Controller into the customer’s applications. It provides MGC3030 system setup, related hardware and software references:
• Aurea Software Package with the Aurea Graphical User Interface and GestIC Library
• MGC3030/3130 Software Development Kit (SDK)
• MGC3030/3130 PIC18 Host Reference code
With the help of these tools, the design-in process can be easily performed in five steps:
1. Feature Definition
2. Electrode Design
3. MGC3030 Parameterization
4. Host Application Programming
5. Verification
Woodstar hardware builds a complete MGC3030 reference system consisting of three
individual PCBs:
• MGC3030 Unit
• I2C™ to USB Bridge
• Reference Electrode with a 95x60 mm sensitive area
It can be plugged to a PC via a USB cable and used for evaluation of the MGC3030
chip and the GestIC technology. During the customer’s design-in process the individual
boards can be combined according to the customer’s needs.
Three examples are given below:
• Combine the MGC3030 unit and the I2C to USB bridge to evaluate customized electrodes
• Use the I2C to USB bridge to parameterize and debug the MGC3030 application circuitry in the customer’s design
• Combine the MGC3030 unit and electrodes to develop gesture-driven applications for PC-based or embedded software environments
Woodstar開發板包括:
• MGC3030 Module
• I2C to USB Bridge Module
• Reference Electrode (95x60 mm sensitive area)
• USB Cable for PC Connection
圖4. Woodstar開發板套件外形圖
圖5. MGC3030帶內部開關的參數化電路圖
圖6. MGC3030帶外部開關的參數化電路圖
圖7. MGC3030基于USB應用的參數化電路圖
圖8. I2C到USB橋的電路圖
圖9. I2C到USB橋的裝配圖
圖10. MGC3030單元的電路圖
I2C到USB橋材料清單:
I2C到USB橋安裝選擇件:
MGC3030單元材料清單:
 |
| |
|
|
|
|
|
| |
|
| |
|
|
